The wait is finally over. This weekend was the start of what I’d been waiting for since the end of September, through the bitter cold, all the parts ordered and installed! CCSCC 3/29/2014 First event of the year was a bit of a cold one – probably never broke 40 degrees, and I ran during…
As alluded to, I installed a new suspension on Thursday night (3/27) with the help of the St. Louis MINI Club. I wanted to wait on posting until I got some more driving impressions in as well as an autocross event (more on that later). Thanks to a loaner garage, we were able to take…
Got a lot done yesterday, starting the updates slow: Brand new Enkei RPF1s in Silver, wrapped in beefy Dunlop Z2’s! A while back, I was debating between 205/50 & 225/45 – now that I see the 205s on the 16×7 wheel, I’m glad I went with them. There’s not too much bulge, and the fitment…
Lot of mini updates, but the dampers are here! Sort of. Just a few last minute adjustments to make on them. Then the struts currently on the MINI will be disassembled, reassembled onto these new springs and dampers, and installed into the MINI. Will be doing the RSB at the same time. May look into…
Finally took some time to get the Schroth Quick Fit harness in. Very easy job, probably 30min max as long as you’ve got everything you need right there. Schroth includes a how-to, but I thought I’d write it out here with pics as well. Tools needed: Socket wrench T50 Torx bit 17mm socket And that’s…
Just a small update here – Spoke with Shaikh @ Fat Cat Motorsports last night regarding some of the suspension tuning and set up. I don’t want to give too much away here, as that is information privy to our sponsorship/technically a paid consulting service but: To recap, I sent Bilstein Sport (B8) dampers over…
Last set of parts have arrived! These parts took nearly an entire month to arrive – these are: JCW Front and Rear springs, matched to my VIN # JCW Front Sway Bar FSB Bushings Front and Rear bump stops (which I actually don’t think I need…) All that’s left to wait on now are the…
More parts are here! The fourth and final Bilstein strut and the Schroth Quick Fit driver’s side harness for the MINI! Pics below. All that’s left now are the springs and FSB, and shipping out the Bilsteins to Fat Cat Motorsports to get custom valved.
Received this from Turner Motorsport today – two stickers to run on the rear windows per our agreement. Not a bad deal to start a relationship with a company as successful as Turner Motorsport! As of 2/23/2015, Turner Motorsport and I have amicably ended our sponsorship relationship. Best of luck to them!
Received a few parts today and the other day: Mainly, Bilstein struts! Somehow, not sure how this happened, but I only received the FR, FL, and RL struts. Confirmed on the shipping slip as well, just the three. Must have been a mixup somewhere, and thankfully I don’t need these right away (it snowed again…
QL Motorsport & Car Journal 