Evo Project: Quiet Exhaust pt. 2

One of the things that had been bothering me when I left off with the final exhaust setup was how the muffler was angled – this was due to the shop not wanting to take the time to fab up the piping necessary to get the muffler flat. I decided to buy some mandrel bent…

Rebuilt Brembo Calipers (Evo)

Had the Brembos rebuilt for the Evo, initially to replace and see if any softness was due to the calipers/condition of them. There were a few minor leaks on the backs of the calipers from the lines as well, and it turned out driver’s side caliper was leaking, looks to be a torn piston seal.…